Watkiss P2T User Manual page 35

5 - Error Conditions, Problems and Solutions - Side-Trimmer Message List
Message
JAM IN SIDE TRIM
Side trim axis moving
Watkiss P2T 2-Knife Trimmer User Manual
Information
Open and then close the top cover
of the side-trimmer.
Then, if necessary, open the top
cover of the side-trimmer and
check for paper trimmings or
obstructions. Close the top cover
of the side-trimmer.
If the message still does not clear,
use the side-trimmer mains ON/
OFF switch. Turn the side-trimmer
OFF, wait at least 5 seconds and
then turn the side-trimmer ON.
If the problem continues, then call
your service engineer.
The side-trim axis is moving. This
message clears when the adjust-
ment is complete. If the message
does not clear:
Open and then close the top cover
of the side-trimmer.
Then, if necessary, open the top
cover of the side-trimmer and
check for paper trimmings or
obstructions. Close the top cover
of the side-trimmer.
If the message still does not clear,
use the side-trimmer mains ON/
OFF switch. Turn the side-trimmer
OFF, wait at least 5 seconds and
then turn the side-trimmer ON.
If the problem continues, then call
your service engineer.
Reference
31