Watkiss P2T User Manual page 26

4 - Standard Tasks - Remove and re-fit the Side-Trimmer Book Supports
Step 2 - fit the inner and outer book supports
There are two outer book supports and
two inner book supports.
Re-fit one at a time.
Refer to the illustrations on page 17.
On each book support, there are semi-
circular cut outs at each end.
Position the cut-outs over the fixing
points.
Press down on the book support so that
it fits onto the fixing points.
Repeat with the other book supports.
22
Fixing
Cut-out
Watkiss P2T 2-Knife Trimmer User Manual