Panasonic KX-TD816CE User Manual page 37

5.2 SLT Features
4
Calling back the message sender
1
2
3
Clearing all messages by the message receiver
1
2
3
your extension number
Conditions
• If multiple messages are left at your extension, calling back is executed in the received
order.
• The system supports a maximum of 128 simultaneous messages. If you try to set the 129th
message, you will hear reorder tone.
• If you hear dial tone 4
• The special ringing tone rings three times at 5 second intervals after which there is an
interval of programmable length. The length of this programmable interval can be set by
System Programming.
• If you set the length of the interval to zero, the special ringing tone doesn't ring.
*
One of the dial tones. Refer to "Tone List" in the Appendix (Section 7).
4. Hang up.
1. Lift the handset.
• You hear dial tone 4
2. Dial the feature number (70) and 2.
• If you have more than one message at your extension, the line is
connected to the message sender which leave the message first.
3. Start talking.
• The message is cleared after the conversation.
1. Lift the handset.
• You hear dial tone 4
2. Dial the feature number (70) and 0.
3. Dial your (message receiver's) extension number.
• All messages are cleared.
after going off-hook, there is a message waiting at your extension.
*
.*
.*
M
39