3.3
Conditions
• The system clock must be set beforehand.
• The Alert button can be assigned to a flexible CO button on Operator 1's extension only.
• The alarm attempt times and the interval time are programmable by System Programming.
The default is 3 attempts (1 attempt=ring for 30 seconds) in a 60 second interval.
• SMDR records the detailed Timed Reminder information and prints it out automatically
when the Timed Reminder starts and is not answered. You can disable the printout by
System Programming.
Programming References
• Station Programming (Section 2.2 in this manual)
Flexible Button Assignment — Alert Button
• System Programming — Installation Manual
[100] Flexible Numbering, Timed Reminder, Remote
[217] Timed Reminder Alarm Repeat Times
[218] Timed Reminder Alarm Interval Time
[990] System Additional Information, Field (36)
Feature References
SMDR for Timed Reminder (Æ See Installation Manual)
Operator Service Features
33