Malaguti Centro 50 4T Workshop Manual page 40

OK
. Horn
• Disconnect horn cables ().
• Connect Tester (DC 0 v) to terminals, as follows:
• Terminal (+) of Tester
• Terminal (-) of Tester
• Turn key "ON".
• Press "HORN" button.
Power measured must be > 1 v.
•
Never invert position of cables.
OK
Replace horn.
4. Check ground connection.
• Connect Tester (Ω) as follows:
• Terminal (+) of Tester
• Terminal (-) of Tester
• Check continuity.
OK
Orange cable between left hand switch and horn is
interrupted: repair it.
See "Wiring Diagram" (P. 8).
S I G N A L L I N G S Y S T E M
Orange cable (1).
Black cable ().
Black cable (1).
Chassis grounding ().
Black cable is interrupted: repair it.
See "Wiring Diagram" (P. 8).

NO
NO
40
Tester (DC 0 v)

1
F. 27
Tester (Ω)
1

F. 28