Malaguti Centro 50 4T Workshop Manual page 23

OK
. Checking starter motor
• Using two cables, connect a 1 v battery to the starter motor and check if the latter is working.
OK
4. Starter relay
• Detach relay connector.
• Connect Tester (Ω) and battery (1v) to relay terminals, as follows:
• Battery (+) pole
• Battery (-) pole
• Terminal (+) of Tester
• Terminal (-) of Tester
Never invert battery connections on relay terminals.
OK
E L E C T R I C A L S T A R T I N G S Y S T E M
Replace starter motor.
Terminal (8).
Terminal (8).
Terminal (8).
Terminal (0).
Replace relay.
NO
NO

Tester (Ω)
87
86
30
N
F. 7
85
F. 8