Priority Marking Configuration Example; Network Requirements - HP A5120 EI Series Configuration Manual

To do...
Associate the class with the
traffic behavior in the QoS
policy
Return to system view
Apply the
QoS policy
Display the priority marking
configuration

Priority marking configuration example

Network requirements

As shown in
The network is described as follows:
Host A and Host B are connected to GigabitEthernet 1/0/1 of Device.

The data server, mail server, and file server are connected to GigabitEthernet 1/0/2 of Device.

Configure priority marking on Device to satisfy the following requirements:
Traffic source
Host A, B
Host A, B
Host A, B
Figure 17 Network diagram for priority marking configuration
Host A
Host B
Use the command...
classifier tcl-name behavior behavior-
name
quit
To an interface Applying the QoS policy to an interface
To online users Applying the QoS policy to online users
To a VLAN Applying the QoS policy to a VLAN
Globally Applying the QoS policy globally
To the control Applying the QoS policy to the control
plane plane
display traffic behavior user-defined [
behavior-name ] [ | { begin | exclude |
include } regular-expression ]
Figure 17, the company's enterprise network interconnects hosts with servers through Device.
Destination
Data server
Mail server
File server
Internet
GE1/0/1 GE1/0/2
Device
Data server
192.168.0.1/24
Mail server
192.168.0.2/24
File server
192.168.0.3/24
51
Remarks
—
—
—
—
—
—
—
Optional
Available in any view
Processing priority
High
Medium
Low