Applying The Qos Policy Globally - HP A5120 EI Series Configuration Manual

To do...
Enter user profile view
Apply the QoS policy
Return to system view
Activate the user profile
NOTE:

If a user profile is active, you cannot modify or remove the QoS policy applied to it, except the ACLs referenced
in the QoS policy. If the users of the user profile are online, the referenced ACLs cannot be modified either.

The QoS policies applied in user profile view support only the remark, car, and filter actions.

Do not apply a null policy in user profile view, because you cannot activate a user profile with a null policy
applied.
Applying the QoS policy to a VLAN
You can apply a QoS policy to a VLAN to regulate traffic of the VLAN.
Follow these steps to apply the QoS policy to a VLAN:
To do...
Enter system view
Apply the QoS policy to VLANs
NOTE:

QoS policies cannot be applied to dynamic VLANs, such as VLANs created by GVRP.

Do not apply a QoS policy to a VLAN and the ports in the VLAN at the same time.

Applying the QoS policy globally

You can apply a QoS policy globally to the inbound direction of all ports.
Follow these steps to apply the QoS policy globally:
To do...
Enter system view
Use the command...
user-profile profile-name
qos apply policy policy-
name { inbound |
outbound }
quit
user-profile profile-name
enable
Use the command...
system-view
qos vlan-policy policy-name vlan
vlan-id-list inbound
Use the command...
system-view
21
Remarks
Required
The configuration made in user profile view
takes effect when the user profile is
activated and the users of the user profile
are online.
For more information about user profiles,
see the Security Configuration Guide.
Required
Use the inbound keyword to apply the QoS
policy to the incoming traffic of the switch
(traffic sent by the online users). Use the
outbound keyword to apply the QoS policy
to the outgoing traffic (traffic received by the
online users).
—
Required
Inactive by default
Remarks
—
Required
Remarks
—