Configuring the packet resource
Configuring the minimum guaranteed packet resource size for
a queue
Follow these steps to configure the minimum guaranteed packet resource size for a queue:
To do...
Enter system view
Configure the minimum
guaranteed packet resource
size for a queue as a
percentage of the dedicated
packet resource per port
NOTE:
Modifying the minimum guaranteed packet resource size for a queue can affect other queues, because the
dedicated resource of a port is shared by eight queues. The system will automatically allocate the remaining
dedicated resource space among all queues that are not manually assigned a minimum guaranteed packet
resource space. For example, if you set the minimum guaranteed packet resource size to 30% for a queue, the
remaining seven queues will each share 10% of the port-specific dedicated resource.
The minimum guaranteed resource settings of a queue apply to the queue with the same number on each port.
Applying the data buffer settings
To have the manual data buffer settings you made take effect, apply them globally.
Follow these steps to apply the data buffer settings:
To do...
Enter system view
Apply the data buffer settings
Use the command...
system-view
buffer egress [ slot slot-number ]
packet queue queue-id
guaranteed ratio ratio
Use the command...
system-view
buffer apply
63
Remarks
—
Optional
51% for queue 2 and 7% for any
other queue by default.
Remarks
—
Required