Configuring Wfq Queuing; Configuration Procedure; Configuration Example - HP A5120 EI Series Configuration Manual

[Sysname-GigabitEthernet1/0/1] qos wrr 6 group 1 weight 12
[Sysname-GigabitEthernet1/0/1] qos wrr 7 group 1 weight 14

Configuring WFQ queuing

Configuration procedure

Follow these steps to configure a WFQ queue:
To do...
Enter system view
Enter
interface
view or port
group view
Enable WFQ queuing
Configure the minimum
guaranteed bandwidth for a
WFQ queue
Specify the queue
scheduling weight for a
WFQ queue
Display WFQ queuing
configuration

Configuration example

Network requirements
1.
 Enable WFQ on GigabitEthernet 1/0/1, and set the weights of queues 0 through 7 to 1, 2, 4, 6, 8,
10, 12, and 14, respectively.
Set the minimum guaranteed bandwidth of queue 0 to 128 kbps.

Configuration procedure
2.
# Enter system view.
<Sysname> system-view
# Configure WFQ queues on GigabitEthernet 1/0/1.
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wfq
[Sysname-GigabitEthernet1/0/1] qos wfq 0 weight 1
[Sysname-GigabitEthernet1/0/1] qos wfq 1 weight 2
[Sysname-GigabitEthernet1/0/1] qos wfq 2 weight 4
[Sysname-GigabitEthernet1/0/1] qos wfq 3 weight 6
Use the command...
system-view
Enter
interface interface interface-type interface-number
view
Enter port
port-group manual port-group-name
group view
qos wfq
qos bandwidth queue queue-id min
bandwidth-value
qos wfq queue-id weight schedule-value
display qos wfq interface [ interface-
type interface-number ] [ | { begin |
exclude | include } regular-expression ]
Remarks
—
Use either command.
Settings in interface view take
effect on the current interface;
settings in port group view take
effect on all ports in the port
group.
Required
The default queuing algorithm on
an interface is WRR queuing.
Optional
64 kbps by default
Optional
1 by default
Optional
Available in any view
44