Connections - Ametek DTI 100 User Manual

3.4

Connections

All signal cables have to be connected to the top plate (grounding on the back plate).
Power and communication cables have to be connected on the back plate.
Top plate connection
8/32
Connections for sensors, where channel 1 is shown.
Please note that the LEMO-connector is only available on the DTI-
1000 model.
Connections for analog out (channel 1 and 2) for the 2 temperature
readings and only available on the DTI-1000 model.
Ground terminal for shield on the signal cables.
Power input for mains adapter 9VDC 200mA.
Connector for RS232C interface.
Back plate connections
11-06-2001 100975 05