Reading; Reset - Ametek DTI 100 User Manual

5.3.2

Reading

In order to change the reading, you must press the softkey <MENU/Enter> 1 time. The
following message will be shown in the display:
Use the softkey <Reset/SELECT> to scroll between following types of read-out:
MODE SELECTION MENU
MODE: T1
T2
│
MODE: DIFF (T1-T2)
│
MODE: T1 MAX.
T1 MIN.
│
MODE: T2 MAX.
T2 MIN
│
MODE: DIFF MAX.
DIFF MIN.
Use the softkey <Menu/ENTER> to select the specific read-out mode.
5.3.3

Reset

Use the softkey <RESET/Select> in order to reset the peak values in the selected difference
mode.
100975 05
MODE: T1
T2
11-06-2001
READ-OUT MODE
23.65 °C
T1
23.60 °C
T2
DIFF (T1-T2)
0.05 °C
23.66 °C
T1MAX.
23.64 °C
T1MIN.
23.61 °C
T2MAX.
23.59 °C
T2MIN.
0.07 °C
DIFFMAX.
0.03 °C
DIFFMIN.
13/32