Display And Error Messages - Ametek DTI 100 User Manual

7.3

Display and error messages

If the DTI detects an error while running, it will automatically appear in the display. Following
error messages can occur:
Display message:
BATTERY LOW
PRESS ANY KEY
T1 ////.///°C
T2 ////.///°C
CONSTANT ERRORS
DEFAULT VALUES
100975 05
Meaning/Action:
Battery voltage low.
Change batteries
(section 7.2).
No sensor connected to input or measuring input
outside range.
Downloaded coefficients rejected.
Check calibration.
Default sensor coefficients used are:
R0: +100.000000 A :+3.90802E-3
B : -5.80200E-7 C : -4.27350E-12
Press any key to continue
11-06-2001 19/32