Introduction - Ametek DTI 100 User Manual

2

Introduction

The DTI (Digital Temperature Indicator) system is designed for fast and traceable calibration
and is ready for use. The system is portable.
Please read this manual carefully before use, to obtain maximum value of your DTI system.
The DTI is prepared for re-calibration by your local calibration laboratories, and all necessary
instructions for the re-calibration is stated in this manual.
The DTI is not designed for continuously data-logging recording, since there is no
guarantee for missed log values during the data-logging.
Definitions and terminology used in this manual:
a. Text inside <> refer to soft-keys on the DTI panel or keys on the PC keyboard.
Text with big letters indicate the activated function if there are more than one function
(example <ON/Off>).
b. Display text on the DTI is shown inside rounded frames.
c. Screen menus in the DTI software are shown inside edged frames.
WARNING:
* Read this manual before use.
* Do not use in hazardous area.
* Do not connect rated voltages to earth with a maximum
above 50V to the input terminals.
4/32 11-06-2001 100975 05