3.2 Indicators; Touch Pad - Ametek DTI 100 User Manual

3.2 Indicators

The DTI only uses the display for all indications. The display has 2*20 characters which will
swap between read-out values or menu selection when requested. Please see section 5.3.1 to
5.3.6 for possible display read-outs. Please note that the error messages will also be showed
in the display, see section 7.3.
3.3

Touch pad

There are 4 soft-keys on the touch pad panel, where 2 of the soft-keys have a double
function.
Switch ON or switch OFF the DTI. Please press down the key at least 0.2
seconds in order to switch on the unit.
MENU toggles between the menus: Mode/Unit/Resolution/Sensor
ENTER enters the menu function selected with the RESET/SELECT key.
RESET resets peak values for both channels.
SELECT toggles between the selected menu functions.
Switch on or switch off the light. The light can be activated for 10 seconds or
constantly.
100975 05 11-06-2001 7/32