LulzBot mini User Manual page 25

Brim
Brim is used to increase surface area of the part you're printing, thereby
ensuring proper part adhesion. This will print a single layer high edge
around the base of the part, helping first layer adhesion and minimizing
warping.
Load Model File
Select the 3D model you would like to print. Either use the Load Model
button or select File > Load Model. Once the file has been loaded, you
will see a 3D rendering of your object on the build platform. Select the
model to see the various options.
Model Orientation
Move your model to change where it is printed on the build plate. Do this
by left clicking on the model and dragging it to the desired location. The
black outlined corner of the 3D print bed view represents the front left
hand corner of the build plate on your printer. You can view your model
from different angles by holding down the right mouse button and dragging.
2.2. QUICK PRINT SETTINGS
25