Table of Contents
Advertisement
KMT12/KMT18
4. UNPACKING
Each K-array loudspeaker is built to the highest standard and thoroughly inspected before leaving the factory. Carefully
inspect the shipping carton, then examine and test your new loudspeaker. If you find any damage, immediately notify the
shipping company. Only the consignee may institute a claim procedure regarding the system's electronic equipment.
5. WARRANTY
K-array systems are warranted against manufacturing defects in materials or craftsmanship over a period of 2
years from the date of original purchase. During the warranty period K-array will, at its discretion, either repair or
replace products which prove to be defective provided that the product is returned in its original packaging, shipping
prepaid, to an authorized K-array service agent or distributor. K-array cannot be held responsible for defects caused
by unauthorized modifications, improper use, negligence, exposure to inclement weather conditions, acts of God
or accidents, or any use of this product that is not in accordance with the instructions provided by K-array. K-array
is not liable for consequential damages. This warranty is exclusive and no other warranty is expressed or implied.
This warranty does not affect your statutory rights.
6. SAFETY
WARNING
•
It is important that loudspeaker systems are used
in a safe manner.
•
Professional loudspeakers are capable of producing
extremely high sound levels and should be used
with care. Hearing loss is cumulative and can result
from levels above 90dB if people are exposed for
an extended period.
•
Never stand close to loudspeakers driven at high
volume.
•
Suspending the system should only be done by
qualified personnel following safe rigging practices.
Secure fixings to the building structure are vital.
Seek help from architects, structural engineers or
other specialists if in any doubt.
•
Do not operate the speaker for an extended period
of time with sound distortion. This is an indication
of malfunction, which in turn can generate heat and
result in a fire.
•
Only connect the power supply to an appropriate
power adapter.
8
•
Do not install the speaker in wet or humid locations
without using weather protection.
•
Do not allow water or any foreign object to get inside
the speaker. Do not put objects containing liquid on,
or near, the unit.
•
To reduce the risk of overheating the amplifier,
avoid exposing it to direct sunlight. Do not install the
unit near heat emitting appliances, such as a room
heater or stove.
•
No naked flame sources such as lighted candles
should be placed near the device.
•
The speaker should be placed so that its location
does not interfere with its proper cooling.
•
Do not attempt to disassemble the unit. The unit
contains no user-serviceable parts. Repairs should
only be performed by factory trained service
personnel.
•
Be sure that the adapter has the correct voltage
value.
REV. A
7. PHYSICAL
32.5 cm
12.91"
REV. A
KMT12/KMT18
KMT12
33.5 cm
13.19"
43.5 cm
17.13"
weight: ?? kg (?? lbs)
9
Advertisement
Table of Contents
Need help?
Do you have a question about the redline KMT12 and is the answer not in the manual?
Questions and answers