Severity Filters - Siemens SCALANCE XB-200 Web Based Management

Configuring with Web Based Management
5.4 The "System" menu
5.4.6.2

Severity Filters

Setting the severity filter
On this page, set the threshold levels for sending system event notifications.
The first table column shows the client type for which you are making the settings:
● E-Mail
Sending system event messages by e-mail
● Log Table
Entry of system events in the log table
● Syslog
Entry of system events in the Syslog file
Select the required level from the drop-down lists of the second table column.
You can select from the following values:
● Critical
System events are processed as of the severity level "Critical".
● Warning
System events are processed as of the severity level "Warning".
● Info
System events are processed as of the severity level "Info".
Procedure
Follow the steps below to configure the required level:
1. Select the required values from the drop-down lists of the second table column after the
client types.
2. Click the "Set Values" button.
88
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02