Siemens SCALANCE XB-200 Web Based Management page 167

Description of the displayed boxes
The page contains the following boxes:
● VLAN ID
If you click on this text box, a drop-down list is displayed. Here you can select the VLAN
ID of a new MAC address you want to configure.
● MAC Address
Here you enter a new MAC multicast address you want to configure.
The table has the following columns:
● Select
Select the row you want to delete.
● VLAN ID
Here, the VLAN ID of the VLAN is displayed to which the MAC multicast address of this
row is assigned.
● MAC Address
Here, the multicast address is displayed that the device has learned or the user has
configured.
● Status - Static
Shows the status of each address entry. The address was entered statically by the user.
Static addresses are stored permanently; in other words, they are not deleted when the
aging time expires or when the device is restarted. These must be deleted by the user.
● Port List
There is a column for each slot. Within a column, the multicast group to which the port
belongs is shown. The following values are possible:
– M
– F
– I
– –
Steps in configuration
Creating a new entry
1. Select the required ID from the "VLAN ID" drop-down list.
2. Enter the MAC address in the "MAC Address" input box
3. Click the "Create" button. A new entry is generated in the table.
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
(Member) Multicast frames are sent via this port.
(Forbidden) Not a member of the multicast group. Moreover, this address may not be
an address learned dynamically with IGMP.
(IGMP) Member of the multicast group, registration was by an IGMP frame. This value
is only dynamically assigned.
Not a member of the multicast group. No multicast frames with the defined multicast
MAC address are sent via this port.
Configuring with Web Based Management
5.5 The "Layer 2" menu
167