Commands Descriptions; Pjl Output Tray; Pcl Output Tray; Ps Output Tray Command - Brother HL-1050 Technical Reference Manual

3.1.

Commands Descriptions

3.1.1. PJL output tray

Format
@PJL SET/DEFAULT OUTBIN=TrayName
Parameter
TrayName*
FINISHER: Select the tray of the Finisher/Stapler unit

Default = ALLSTACKER
Explanation
 This command selects the Finisher/Stapler unit.
 This command is ignored when the Finisher/Stapler unit is not available.
 The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.

3.1.2. PCL output tray

Command
Esc&l#G (27)(38)(108)#(71)
Parameter
# denotes the output tray.
100 Select the Finisher/Stapler unit.

:
Default = 1
Explanation
 This command selects the Finisher/Stapler unit.
 This command is ignored when the Finisher/Stapler unit is not available.
 The PJL OUTBIN command is ignored when this command is executed.
3.1.3. PS output tray
Command
<</BROutbinMode #>>setpagedevice
Parameter
#
Select the Finisher/Stapler unit.
3:

Default = 0
Explanation
 This command selects the Finisher/Stapler unit.
 This command is ignored when the Finisher/Stapler unit is not available.
<Example>
<</BROutbinMode 3>>setpagedevice
APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 4
<1Bh><38h><6ch>#<47h>