Setting On The Control Panel - Brother HL-1050 Technical Reference Manual

2.2.2.

Setting on the control panel

HL-L5000D/L5580D/L5100DN/L5200DW/L6200DW/L6300DW/L6400DW)
(
PRINT CARBON
MENU MENU
When CARBON COPY=OFF is set, other carbon menu is not indicated.
The setting indication of each copy is shown on the control panel for the number of copies which is
set in the CARBON COPIES menu to set the paper tray and macro.
The setting of each copy is saved even if it is not indicated.
When implementing FACTORY RESET, all settings are initialized.
CHAPTER 10 CARBON COPY FUNCTION - 6
CARBON COPY =OFF/ON/
COPIES =1 - 8
COPY 1 TRAY =MPTRAY
TRAY 1
TRAY 2
TRAY 3
TRAY 4
TRAY 5
COPY 1 MACRO =OFF
(ID number)
(Same with COPY 1)
COPY 2 TRAY
COPY 2 MACRO (Same with COPY 1)
COPY 3 TRAY (Same with COPY 1)
(Same with COPY 1)
COPY 3 MACRO
COPY 4 TRAY (Same with COPY 1)
COPY 4 MACRO (Same with COPY 1)
(Same with COPY 1)
COPY 5 TRAY
COPY 5 MACRO (Same with COPY 1)
COPY 6 TRAY (Same with COPY 1)
COPY 6 MACRO (Same with COPY 1)
COPY 7 TRAY (Same with COPY 1)
COPY 7 MACRO (Same with COPY 1)
COPY 8 TRAY (Same with COPY 1)
COPY 8 MACRO (Same with COPY 1)
Sets the carbon copy mode.
Sets the number of copies.
Selects the paper tray.
Sets the additional macro.
(Note) When no macro is
set, 'NO MACRO
DATA' is indicated,
and the display
returned.
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)