For large-scale graphic images it is more efficient to use vector graphics. In LaserJet emulation mode you can
set up the page area on which to print vector graphics images. The vector graphics capabilities of these HL
Series printers working in HP-GL/2 mode are described in the HP-GL/2 section of this manual.
6.4.1. Enter HP-GL/2 mode
This command enters HP-GL/2 graphics mode.
# = 0 the cursor is positioned at the previous HP-GL/2 cursor position. If this is the first time you have
switched to HP-GL/2 mode since switching the printer on, the cursor is placed at the origin of the HP-GL/2
# = 1 the cursor remains at its current position.
CHAPTER 2 PCL - 99