Commands; Initialization And Default Setting Instructions - Brother HL-1050 Technical Reference Manual

3.

COMMANDS

3.1.

Initialization and Default Setting Instructions

DF - Default set instruction
DF[;]
 Returns the graphics mode to the default conditions.
 The following are the default settings.
Function
Plot mode
Relative character direction
Line type
Line pattern length
Window
Relative character size
Symbol mode
Tick length
Standard character set
Alternate character set
Character set
Character slant
Scaling
Label terminator
Chord angle
Fill type
Fill distance
Fill slant
Pen Thickness
NOTE:
IN - Initialize set instruction
IN[;]
 Returns the graphics mode to the following initial conditions;
Function
Plot mode
Relative character direction
Line type
Line pattern length
Window
Relative character size
Symbol mode
Tick length
Standard character set
Alternate character set
Character set
Character slant
Scaling
Label terminator
Chord angle
The location of the scaling points(P1, P2) remains constant.
CHAPTER 9 HP-GL - 6
Equivalent Condition
Instruction
PA; Absolute plotting
DR 1,0; Horizontal
LT; Solid line
LT; 4% of distance from P1 to P2
IW; Set at limits of printable area
according to paper size
SR; Width=0.75% of |P2x - P1x|
Height=1.5% of |P2y - P1y|
SM; Off
TL; X-axis: 0.5% of |P2y - P1y|
Y-axis: 0.5% of |P2x - P1x|
CS 0; Character set 0
CA 0; Character set 0
SS; Standard character set selected
SL 0; 0 degrees
SC; Off
DT chr$(3) chr$(3)
----- 5 degrees
FT; Bi-directional fill, type 1
FT; 1% of distance from P1 to P2
FT; 0 degrees
PT; Set at 0.3 mm
Equivalent Condition
Instruction
PA; Absolute
DR 1,0; Horizontal
LT; Solid line
LT; 4% of distance from P1 to P2
IW; Set at limits of printable
area according to paper size
SR; Width=0.75% of |P2x-P1X|
Height=1.5% of |P2y-P1y |
SM; Off
TL; X-axis: 0.5% of |P2y-P1y |
Y-axis: 0.5% of |P2x-P1x|
CS 0; Character set 0
CA 0; Character set 0
SS; Standard character set
selected
SL 0; 0 degrees
SC ; Off
DT chr$(3) chr$(3)
----- 5 degrees