Page Format - Brother HL-1050 Technical Reference Manual

5.2.

Page Format

Set page length
EscCn (27)(67)n
This command sets the page length in lines.
or
EscCNULn (27)(67)(0)n
 This command sets the page length in inches.
 n is the number of lines that make up one page, or the length of the page in inches, according to the
form of the command.
 If the first form of the command is used (n = the number of lines in the page) the current line spacing
setting is used to determine the length of the page.
 If the first form of the command is used, n must be in the range 1 to 255.
 If the second form of the command is used ( n = page length in inches ), n must be in the range 1 to
14.
LPRINT CHR$(27); CHR$(81); CHR$(22); 'Disable printer
Set left and right margins
EscXmn (27)(88)mn
 This command sets the left and right margins.
 m = the number of character positions at the current pitch (characters per inch) between the left edge
of the page and the left margin.
 n = the number of character positions at the current pitch between the left edge of the page and the
right margin.
 If you set m = 0 the current left margin setting is retained.
 If you set n = 0 the current right margin setting is retained.
LPRINT CHR$(18); 'Set pitch to 10 CPI
LPRINT CHR$(27); CHR$(88); CHR$(10); CHR$(70); 'Set margins to 1" and
7"
Set perforation skip
EscNn (27)(78)n
 This command sets the bottom margin and enables perforation skip, that is, whenever the print
position reaches the bottom margin the printer performs a page eject and moves the print position to
the top of the next page.
 n = the number of lines at the current line space setting between the bottom edge of the page and the
bottom margin.
 n must be in the range 1 to 255.
 Esc C (set page length) and Esc O(Cancel perforation skip) cancel automatic perforation skip.
 If the bottom margin is set to be above the top margin, the top margin is discarded and one line is
enabled for printing.
LPRINT CHR$(27); CHR$(78); CHR$(4); 'Set bottom margin to 4 lines.
Cancel perforation skip
EscO (27)(79)
This command cancels the automatic perforation skip feature.
LPRINT CHR$(27); CHR$(79); 'Cancel perforation skip.
<1Bh><43h>n
<1Bh><43h><00h>n
<1Bh><88h>mn
<1Bh><4Eh>n
<1Bh><4Fh>
CHAPTER 7 IBM PROPRINTER - 11