Definition Of Parameters; Bar Code Mode; Bar Code Style, Expanded Character Shading, Line Block Drawing & Box Drawing Shading - Brother HL-1050 Technical Reference Manual

3.

DEFINITION OF PARAMETERS

This bar code command can have the following parameters in the parameter segment (n ... n). Parameters are
effective only within the single command sequence using the syntax ESC i n ... n \. They do not take effect in
any subsequent bar code commands. If any parameters are not specified, they take the default settings. The
last parameter must be the bar code data start identifier ("b" or "B") or the expanded character data start
identifier ("l" or "L"). Other parameters can be specified in any sequence. The prefix of each parameter can
be either a lower-case or upper-case character, - for example, "t0" or "T0", "s3" or "S3", etc.
3.1.

Bar Code Mode

(All Model)
n = "t0" or "T0"
n = "t1" or "T1"
n = "t3" or "T3"
n = "t4" or "T4"
n = "t5" or "T5"
n = "t6" or "T6"
n = "t9" or "T9"
n = "t12" or "T12"
n = "t13" or "T13"
n = "t14" or "T14"
n = "t130" or "T130"
n = "t131" or "T131"
n = "t132" or "T132"
n = "t133" or "T133"
n = "t134" or "T134"
(only HL-
L5000D/L5580D/L5100DN/L5200DW/L6200DW/L6300DW/L6400DW/L8250CDN/L8350CDW/L9200CDW
/L9300CDW)
n = "t137" or "T137"
n = "t138" or "T138"
n = "t139" or "T139"
n = "t140" or "T140"
n = "t141" or "T141"
n = "t142" or "T142"
n = "t143" or "T143"
n = "t144" or "T144"
n = "t145" or "T145"
n = "t146" or "T146"
n = "t147" or "T147"
n = "t148" or "T148"
n = "t149" or "T149"
n = "t150" or "T150"
n = "t151" or "T151"
n = "t152" or "T152"
n = "t200" or "T200"
n = "t201" or " 201"
n = "t202" or "T202"
This parameter selects the bar code mode as above. When n is "t5" or "T5", the bar code mode (EAN 8, EAN
13, or UPC A) varies according to the number of characters in the data.
3.2. Bar Code Style, Expanded Character Shading, Line Block Drawing & Box
Drawing Shading
 Bar Code Style
n = "s0" or "S0"
CODE 39 (default)
Interleaved 2 of 5
FIM (US-Post Net)
Post Net (US-Post Net)
EAN 8, EAN 13, or UPC A
UPC E
Codabar
Code 128 set A
Code 128 set B
Code 128 set C
ISBN (EAN)
ISBN (UPC-E)
EAN 128 set A
EAN 128 set B
EAN 128 set C
Code 93
Code 93 Extend
GS1 Databar Omnidirectional
GS1 Databar Truncated
GS1 Databar Stacked
GS1 Databar Stacked Omnidirectional
GS1 Databar Limited
GS1 Databar Expanded
GS1 Databar Expanded Stacked
MSI
MSI + CHK10
MSI + CHK11_IBM
MSI + CHK11_NCR
MSI + CHK10 + CHK10
MSI + CHK11_IBM + CHK10
MSI + CHK11_NCR + CHK10
PDF417
Compact PDF417
Macro PDF417
3 : 1 (default)
CHAPTER 8 BAR CODE CONTROL - 5