Specifications; Explanation Of Each Function; Carbon Copy Mode Setting; Setting Of The Number Of Copies - Brother HL-1050 Technical Reference Manual

2.

SPECIFICATIONS

2.1.

Explanation of each function

2.1.1.

Carbon copy mode setting

Sets the carbon copy function to ON or OFF.
ON: Turns on the carbon copy function.
OFF: Turns off the carbon copy function.
AUTO: Turns on the carbon copy function when the @PJL ENTER LANGUAGE command is not
PARALLEL: Turns on the carbon copy function when the print data is received through the parallel
The factory setting is OFF.
2.1.2.

Setting of the number of copies

Sets the number of carbon copies.
The number can be set to 1 (one) to 8 (eight).
The factory setting is 1 (one).
2.1.3.

Paper tray selection setting

Selects the paper tray for each copy.
AUTO/REMAINING
MPTRAY
TRAY1
TRAY2 (Only when the Tray 2 is installed)
TRAY3 (Only when the Tray 3 is installed) (Only HL-5270DN/5280DW/5380DN Printer)
The factory setting is AUTO for all pages.
2.1.4.

Additional macro setting

Sets the additional macro for each copy.
The macro data of the PCL emulation which is registered in the storage device or memory can be
used.
The macro is registered by using the printer driver, macro registration command of the PCL
emulation or other.
Select OFF when any macro is not added.
The factory setting is OFF for all pages.
included in the print data, and turns off when the @PJL ENTER LANGUAGE command is
included.
interface, and turns off when it is received through other interface such as USB, Net,
etc.
All trays can be selected when AUTO is set.
When the one tray is selected to fix for other copy, the AUTO setting is switched to
REMAINING, and other trays than the fixed one can be selected.
If REMAINING is set when all trays are fixed, the Tray 1 is fixed.
The paper tray is fixed to the MP tray.
The paper tray is fixed to the Tray 1.
The paper tray is fixed to the Tray 2.
The paper tray is fixed to the Tray 3.
CHAPTER 10 CARBON COPY FUNCTION - 4