Brother HL-L5100DNT Quick Setup Manual

HL‑L5000D / HL‑L5100DN / HL‑L5100DNT / HL‑L5200DW /
HL‑L5200DWT / HL‑L6200DW / HL‑L6250DN / HL‑L6300DW /
HL‑L6300DWT / HL‑L6400DW / HL‑L6400DWT
Quick Setup Guide
Unpack the machine and check the components
Drum Unit and Toner
Cartridge Assembly
(pre‑installed in models
HL‑L6400DW (For Oceania))
Watch our Video FAQs for
help with setting up your
Brother machine:
solutions.brother.com/videos.
1
Remove the packing materials and install the drum unit and toner cartridge assembly
HL‑L5000D / HL‑L5100DN(T) / HL‑L5200DW(T) / HL‑L6200DW / HL‑L6300DW(T) / HL‑L6400DW (For Oceania)
HL‑L6250DN / HL‑L6400DW (Except for Oceania) / HL‑L6400DWT
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
4
Select your language (if needed)
„ For LCD models
1.
Press ▼ or ▲ to select [General Setup], and
then press OK.
2.
Press OK to select [Local Language].
3.
Press ▼ or ▲ to select your language, and then
press OK.
4.
Press Cancel.
Drum Unit
(pre‑installed in models
HL‑L6250DN /
HL‑L5000D /
HL‑L6400DW (Except for Oceania) /
HL‑L5100DN(T) /
HL‑L6400DWT)
HL‑L5200DW(T) /
HL‑L6200DW /
HL‑L6300DW(T) /
Installation CD‑ROM
Quick Setup Guide Product Safety Guide
Discard the silica gel pack.
Remove the orange part.
Adjust the paper
guides.
Front
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother Solutions
Center: solutions.brother.com/manuals.
NOTE:
• The available connection interfaces vary depending on the model.
• You must purchase the correct interface cable for the interface you
want to use.
Inbox Toner Cartridge
(models HL‑L6250DN /
HL‑L6400DW (Except for Oceania) /
HL‑L6400DWT)
AC Power Cord
Reference Guide
• The illustrations in this Quick Setup Guide show the HL‑L5200DW
(only for certain models)
and the HL‑L6400DW.
Remove the orange part.
Remove the orange part.
„ For Touchscreen models
1.
On the machine's Touchscreen, press
[Settings] > [General Setup] >
[Local Language].
2.
Press your language.
3.
Press .
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
Network cable
(For HL‑L5100DN(T) / HL‑L5200DW(T) / HL‑L6200DW /
HL‑L6250DN / HL‑L6300DW(T) / HL‑L6400DW(T))
Use a straight‑through Category 5 (or greater) twisted‑pair cable.
Parallel cable
(For HL‑L5000D)
Use the parallel cable provided with the machine. If the parallel
cable is not provided with the machine in your country or region,
please contact Brother customer service or your local Brother
dealer to purchase the optional parallel cable (PC‑5000).
D004S9001‑00
UK
Version 0