Page Format Mode - Brother HL-1660E User Manual

USER'S GUIDE
AUTO Mode
AUTO LF
AUTO CR
AUTO WRAP
AUTO SKIP
AUTO MASK
4–22
Note on "AUTO MASK"
When you use application software in non-HP modes, be sure to set
"AUTO MASK" to ON. When you use letter- or A4-size paper, the top
and bottom 2 lines are masked and they do not appear on the printout.
The auto modes are subject to the current emulation mode.
O : The auto modes can be set.
X : The auto modes cannot be changed and no setting appears.
— : The auto modes are not available.
Printer Emulation (Factory settings in bold print)
HP
LaserJet
O OFF
O OFF
O OFF
O ON
—
Note
In the IBM emulation mode, FF codes are always followed by a CR code.

PAGE FORMAT MODE

Notes
The settings in this mode menu vary as follows:
All settings are effective in the HP LaserJet, EPSON FX-850, and
IBM Proprinter XL modes.
The X and Y (vertical and horizontal) offsets are effective in the BR-
Script 2 mode. Other settings are not effective and they do not appear
in this mode.
The paper size and the X and Y (vertical and horizontal) offsets are
effective in the HP-GL mode. Other settings are not effective and they
do not appear in this mode.
EPSON IBM
FX-850 Proprinter XL
O OFF O OFF
X ON O OFF (Note)
X ON X ON
— —
O OFF O OFF