NEC POWERMATE 2000 Service And Reference Manual page 39

Menu Item
Multi-Sector Transfers
LBA Mode Control
32-Bit I/O
Transfer Mode
Ultra DMA Mode
Keyboard Features
Numlock
Key Click
Keyboard auto-repeat
rate
Keyboard auto-repeat
delay
Legacy USB Support
Main Menu Items
Settings (default is bold)
Disabled, 2, 4, 8, 16 sectors
Determines the number of sectors per block for multi-sector
transfers.
When Type is Auto, value in Multi-Sector Transfers field is
auto-detected and field is read only.
Enabled, Disabled
When Enabled is selected, it causes logical block addressing
to be used in place of cylinders, heads, and sectors.
When Type is set to Auto, the value in the LBA Mode field is
auto-detected and the field is read only.
Disabled, Enabled
When Enabled, allows 32 bit data transfers.
Standard, Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, Fast
PIO3/DMA1, Fast PIO4/DMA2
Selects the method for moving data to and from the drive.
When Type is set to Auto, the value in the field is auto-
detected and the field is read only.
Disabled, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4
Selects the Ultra DMA Mode for moving data to and from the
drive. Autotype the drive to select the optimum transfer mode.
When Type is set to Auto, the value in the field is auto-
detected and the field is read only.
Press Enter to check or change keyboard parameters.
Auto, On, Off
Selects the power-on state for Num Lock.
Disabled, Enabled
Enables or disables key click.
30/sec, 26.7/sec, 21.8/sec, 18.5/sec, 13.3/sec, 10/sec, 6/sec,
2/sec
Selects key repeat rate.
1/4 sec, 1/2 sec, 3/4 sec, 1 sec
Selects delay before key repeat.
Disabled, Enabled
Disables or enables legacy USB support.
System Configuration 2-11