Installing The Lcd Panel - NEC POWERMATE 2000 Service And Reference Manual

6. Install the LCD panel as follows.
!
Align the collar inside the system unit chassis so that the collar tab is
pointing toward the power switch.
!
From the outside of the system unit chassis, insert the LCD panel cables
through the chassis collar.
!
Align the three guide pins on the LCD panel collar with the guide pin
holes in the LCD mount on the outside of the chassis (see the following
figure).
!
Insert the LCD panel stem into the LCD mount on the outside of the
chassis. Ensure that the guide pins are in the pin holes.
!
Check that the LCD panel stem is fully seated in the chassis mount.
!
Secure the LCD panel to the system unit with the four previously
removed screws.
A – LCD Panel Collar
B – Guide Pins (2 of 3)
C – Guide Pin Holes (3)
3-22 Disassembly and Reassembly

Installing the LCD Panel

D – Chassis Collar
E – LCD Mount