Port - Provision ISR I1-390IPS36 User Manual

IPC "S Series" User Manual
 Use PPPoE: Enter the user name and password provided by your ISP.
You can choose either of the network connection. If you use PPPoE to connect, you will get a
dynamic WAN IP address. This IP address will change frequently. You may use the function
of IP change notification.
Trigger Email: when the IP address of the device is changed, a new IP address will be sent to
the appointed mailbox automatically. (Email must be configured)
Trigger FTP: when the IP address of the device is changed, a new IP address will be sent to
FTP server.

4.4.2 Port

Go to ConfigNetworkPort. HTTP, Data and RTSP ports can be set.
HTTP Port: The default HTTP port is 80. It can be changed to any port which is not occupied.
Data Port: The default data port is 9008. Can be changed if required.
RTSP Port: The default port is 554. Can be changed if required.
18