Alarm Configuration; Motion Detection - Provision ISR I1-390IPS36 User Manual

IPC "S Series" User Manual

4.3 Alarm Configuration

Alarm configuration includes two submenus: Motion Detection and Alarm Server.

4.3.1 Motion Detection

To set motion detection:
1. Go to ConfigAlarmMotion Detection to set motion detection alarm.
Mark "Enable Alarm" check box to activate motion based alarm. Choose alarm holding time
and set alarm trigger options.
Trigger Email: Email address needs to be set first in the Mail config interface. The triggered
snap pictures and event will be sent into those addresses.
Trigger FTP: The triggered snap pictures will be sent into FTP server address. Please refer to
FTP configuration chapter for more details.
2. Set motion detection area and sensitivity. Click "Area and Sensitivity" tab to see the
following sub-menu.
15