Reboot Device; Upgrade; Log - Provision ISR I1-390IPS36 User Manual

IPC "S Series" User Manual
 Import & Export Setting:
You can import or export the setting information from PC or to device.
1. Click "Browse" to select save path for import or export information on PC.
2. Click "Import Setting" or "Export Setting" button.
 Default Setting
Click "Load default" button to restore all system settings to factory settings.

4.6.2 Reboot Device

Go to ConfigMaintenanceReboot.
Click "Reboot" button to reboot the device.

4.6.3 Upgrade

Go to ConfigMaintenanceUpgrade. In this interface, you can upgrade the system.
1. Click "Browse" button to select the save path of the upgrade file.
2. Click "Upgrade" button to start upgrading the application program.
3. The device will restart automatically.
4. After you have successfully updated the software, click "OK" button to close IE and then re-
open IE to connect.
Caution! Do not disconnect the PC or the IPC during the upgrade process.

4.6.4 Log

To query and export log
1. Go to ConfigMaintenanceOperation Log.
2. Select the main type, sub type, start and end time.
3. Click "Query" to view the operation log.
4. Click "Export" to export the operation log.
You can export and view the run log by clicking ConfigMaintenanceRun Log.
27