Provision ISR I1-390IPS36 User Manual page 12

IPC "S Series" User Manual
Router Setup
④ Open the IE browser and input its WAN IP and http port to access. (For example:
192.168.1.201:81)

Access through PPPoE dial-up
Network connection
You may access the camera through PPPoE auto dial-up. The setting steps are as follow:
① Go to ConfigNetwork Port menu to set the port number.
② Go to Config Network TCP/IPv4PPPoE Config menu. Check "Enable" and input the
user name and password (Provided by your internet service provider).
③ Go to Config Network DDNS menu. Before you configure the DDNS, please apply
for a domain name first. Please refer to the DDNS Configuration for detailed information.
④ Open the IE browser and input the domain name and http port to access.
7