Directly Access Through Ie - Provision ISR I1-390IPS36 User Manual

IPC "S Series" User Manual
Input the username and password to log in. If you input the wrong password for the first time,
you shall wait for 10 seconds and then input the right password.

The default username is "admin"; the default password is "123456".

2.1.2 Directly Access through IE

The default network settings are as shown below:
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
HTTP: 80
Data port: 9008
You may use the above default settings when you log in the camera for the first time. You may
directly connect the camera to the computer through network cable.
① Manually set the IP address of the PC. The network segment should be as the same as the
default settings of the IP camera (192.168.226.x). Open the network and sharing center. Click
"Local Area Connection" to pop up the following window.
4