Switching On; Using The Remote Control Panel - Beretta METEO GREEN HE R.S.I. Installer And User Manual

2 - SWITCHING ON

With the dashboard cover closed, push the button
on the display the desired operating mode, summer
- - (the display shows one of the available winter opera-
ting modes – see section "Winter operating mode").

3 - USING THE REMOTE CONTROL PANEL

3.1 Basic functions (dashboard cover closed)
Summer/Winter
With the cover closed, the following buttons are enabled:
l
On/Off, selects the operating mode
Pause/Holiday (Interrupts the heating schedule)
In winter mode, selects the operating mode: ma-
nual, night or automatic
until you see
or winter
The remote control panel
starts up in the operating
mode in which was set to
work before it was switched
off: if it was in winter mode
, it starts up in winter mode; if
it was in summer mode
starts up in summer mode.
The boiler will start up and
continue to operate until the
selected temperatures are
reached.
If faults occur on starting or
operating, the boiler will make
a "safety stop" and a fault
Pause/holiday button
On/Off
Resetting faults
(press both keys simultaneously)
PAUSE
AUTO I MAN
+
RESET
tion "Faults".
ATTENTION
The remote control panel carries out different functions, depending
, it
on the dashboard cover being open or closed.
With the dashboard cover closed, basic functions are available,
which allow the user to switch on or off the boiler, choose the desi-
red operating mode and unblock the boiler when a fault occurred.
It is very interesting the presence of the selector for adjusting the
room temperature, which facilitates the correction of the room tem-
perature set with ± 5°C.
With the dashboard cover open, advanced functions are available,
as for instance regulating temperatures, setting the heating sche-
dule and others
(see dedicated chapter).
Manual/Automatic operating mode
±5°C given the
room temperature set
Pressed simultaneously, they unblock the boi-
PAUSE
AUTO I MAN
ler (RESET)
+
RESET
°C
Selector for adjusting the room temperature
set with ±5°C.
- +
METEO GREEN HE R.S.I.
code will appear on the display.
To reset the boiler:
press the PAUSE and AUTO-
MAN buttons simultaneously on
the remote control panel.
If the blocking fault occurs over
again, contact the Service Center.
For detailed information, see sec-
39