Bunn IMIX-3S+ Installation & Operating Manual page 17

CLEANING - CLEAN CYCLE continued
6. When screen displays PRESS DISPENSE TO START, press any
beverage dispense button to begin cleaning cycle.
7. During the cleaning cycle, the screen with display CLEANING
CYCLE IN PROGRESS/PRESS ANY BUTTON TO STOP.
8. When the cleaning cycle is complete, screen will display SE-
LECT MODE/ RINSE__ CLEAN.
9. Discard the waste water collected from the cleaning cycle.
10. Open the dispenser door, and place the NORMAL/PROGRAM/
RINSE switch in the NORMAL position.
17
52384.0 101116