Operating The Dispenser - Bunn IMIX-3S+ Installation & Operating Manual

OPERATING CONTROLS AND INTERFACE
1. Cup Size Buttons: Momentarily pushed to select beverage size to dispense.
2. Dispense Buttons: Momentarily pushed to dispense selected beverage
3. LED indicators: Illuminates when the adjoining button has been selected.
1
2

OPERATING THE DISPENSER

The NORMAL/PROGRAM/RINSE switch must be in the NORMAL position
1. Place a cup on the drip tray beneath the dispense nozzle.
2. In the area marked "1" of the control panel:
a. Select desired beverage size, small or large cup. This selection is mandatory for dispensing.
3. In the area marked "2" of the control panel:
a. Press the button to dispense the desired beverage. Dispensing is portion controlled, and will automatically stop
when the correct amount of beverage has been dispensed.
NOTE: Pressing any dispense button during dispensing will stop the dispense sequence
10
3
2
52384.0 101116