Page 1
To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and manual updates. For Technical Service, contact Bunn-O-Matic Corporation at 1-800-286-6070.
SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.
NOTE - Bunn-O-Matic recommends 3⁄8" copper tubing for all installations from the 1⁄2" water supply line. A tight coil of tubing in the water line will facilitate moving the brewer to clean the countertop. Bunn-O-Matic does not recommend the use of a saddle valve to install the brewer. The size and shape of the hole made in the supply line by this type of device may restrict water flow.
WITHOUT A SMART FUNNEL AND G9-2T DBC GRINDER: 1. Begin each brew cycle with a clean empty brew funnel. 2. Insert a BUNN filter into the funnel. 3. Pour the fresh coffee into the filter and level the bed of grounds by gently shaking.
3. The use of a damp cloth rinsed in any mild, nonabrasive, liquid detergent is recommended for cleaning all surfaces on Bunn-O-Matic equipment. Do NOT clean this equipment with a water jet device. CAUTION – DO NOT KEEP BREWED ICED TEA OVERNIGHT. THE SERVER MUST BE CLEANED DAILY.
Brew B: This is used to select options that appear on the display during programming. e) Brew C: This is used to select options that appear on the display during programming. For more advanced PROGRAMMING information, refer to programming manual 41581.0001 at www.bunn.com Page 12 36748.1 112608...
Page 13
With the switch in the "ON" position, the programming menus can still be accessed to view the current settings. However, no changes will be saved. For more advanced PROGRAMMING information, refer to programming manual 41581.0001 at www.bunn.com Page 13 36748.1 112608...
Page 14
ENTER SERVICE # SET RECIPES TEMPS SERVICE TOOLS BREW BREW BREW BREW BREW BREW BREW BREW BREW BREW BREW BREW FACTORY DEFAULTS For more advanced PROGRAMMING information, refer to programming manual 41581.0001 at www.bunn.com BREW BREW BREW Page 14 36748.1 112608...
Need help?
Do you have a question about the Infusion Series ITCB and is the answer not in the manual?
Questions and answers