Bunn IMIX-3S+ Installation & Operating Manual page 15

CLEANING - continued
RINSE CYCLE (Required Daily)
1. Open the door and place the NORMAL/PROGRAM/RINSE
switch in the RINSE position.
2. Close door and place a minimum 400ml container under
the dispense nozzles.
3. Press the button under RINSE on the screen.
4. Press any beverage selection button.
5. The dispenser will automatically run hot water through both soluble mixing chambers, and flush the
espresso brew chamber with hot water.
6. After rinse cycle is complete, discard the rinse water collected in the container.
7. Open the dispenser door, and place the NORMAL/PROGRAM/RINSE switch in the NORMAL position.
15
52384.0 101116