Sync With Flow App - Polar Electro M460 User Manual

1. Plug the micro USB connector into the USB port in the M460, and plug the other end of the cable into your PC. Make
sure FlowSync software is running.
2. The FlowSync window opens on your computer, and the syncing starts.
3. Completed is displayed when you are done.
Every time you plug in your M460 to your computer, the Polar FlowSync software will transfer your data to the Polar Flow
web service and sync any settings you may have changed. If the syncing does not automatically start, start FlowSync from
the desktop icon (Windows) or from the applications folder (Mac OS X). Every time a firmware update is available,
FlowSync will notify you, and request you to install it.
If you change settings in the Flow web service while your M460 is plugged into your computer, press the synchronize but-
ton on FlowSync to transfer to the settings to your M460.
For support and more information about using the Flow web service, go to support.polar.com/en/support/flow.
For support and more information about using FlowSync software, go to support.polar.com/en/support/FlowSync.

SYNC WITH FLOW APP

Before syncing make sure:
You have a Polar account and Flow app
l
You have registered your M460 in the Flow web service and synced data via FlowSync software at least once.
l
Your mobile device has Bluetooth turned on, and airplane mode/flight mode is not turned on.
l
You have paired your M460 with your mobile. For more information, have a look at
l
There are two ways to sync your data:
1. Sign into Flow app and press and hold the BACK button on your M460.
2. Connecting to device
3. Syncing completed
or
1. Sign into Flow app and go to
ton on your M460.
2. Connecting to device
3. Syncing completed
When you sync your M460 with the Flow app, your training data is also synced automatically via an internet connection
to the Flow web service.
For support and more information about using Polar Flow app, go to support.polar.com/en/support/Flow_app.
is displayed, followed by
is displayed when you are done.
Settings > General settings > Pair and sync > Sync data
is displayed, followed by
is displayed when you are done.
Connecting to app.
Connecting to app.
59
Pairing Mobile Device with M460.
and press the START but-