Polar Look Kéo Power Sensor Bluetooth® Smart; Pair Kéo Power With M460 - Polar Electro M460 User Manual

Choose the heart rate sensor you want to pair and then choose Yes.
4. Pairing completed
POLAR LOOK KÉO POWER SENSOR BLUETOOTH® SMART
With Polar LOOK Kéo Power, you can truly develop your cycling performance and technique. Perfect for ambitious cyclists,
this system uses Bluetooth® Smart technology and consumes only a little energy.
Measures your power output (in Watts) and force (in Newton).
l
Easy to set up and switch between bikes.
l
M460 shows your power output in Watts, Watts/kg or % of FTP (functional threshold power).
l
M460 shows your left/right balance and current, average and maximum cadence.
l
Kéo Power Bluetooth® Smart set includes two pedals and two power transmitters.
Kéo Power Essential Bluetooth® Smart is an economical choice for basic power measurement. It measures your power
output and force with the left hand pedal and provides your total power/force by multiplying the measurement by two. The set
includes two pedals and one power transmitter.
PAIR KÉO POWER WITH M460
Before pairing Kéo Power make sure you have installed it correctly. For information on mounting the pedals and installing the
transmitters see the Polar LOOK Kéo Power user manual that came in the product box, or the video tutorial.
If you have two power transmitters, you need to pair the transmitters one at a time. After pairing the first transmitter, you can
immediately pair the second one. Check the device ID on the backside of each transmitter to make sure you find the correct
transmitters from the list.
There are two ways to pair Keó Power with your M460:
1. Go to General Settings > Pair and sync > Pair other device
2. Rotate the cranks to wake up the transmitters. M460 starts searching for Kéo Power.
3. Once the it is found,
4. Press START, Pairing
5. Pairing completed
6. Sensor linked to:
pedal to pair? is displayed. If you have two transmitters, choose
7. Set crank length: Set the crank length in millimeters.
The first cycling sensor you pair will automatically be linked to
or
1. Press START in time view to enter pre-training mode.
2. Rotate the cranks to wake up the transmitters.
3. The device ID Pair Polar PWR xxxxxxxx
4. Pairing completed
is shown when you are done.
Polar PWR xxxxxxxx
is displayed.
is displayed when you are done.
is displayed. Choose Bike
is displayed. Choose Yes.
is shown when you are done.
and press START.
is displayed.
1, Bike 2 or Bike 3. Confirm with START.
Yes
Bike
18
Do you have another
to pair the other one.
1.