Using An Accessory With Your Cs600X Cycling Computer - Polar Electro CS600X Getting Started Manual

ENGLISH

Using an Accessory with Your CS600X Cycling Computer

Polar CS600X cycling computer is compatible with the following Polar W.I.N.D sensors:
The Polar LOOK Kéo Power system, Polar Speed Sensor W.I.N.D, Polar Cadence Sensor W.I.N.D and the
Polar G5 GPS Sensor.
If you purchase a new sensor, it has to be activated by and introduced to the cycling computer. This is
called teaching and takes only a few seconds. Teaching ensures that your cycling computer receives
signals from your sensors only, and enables disturbance-free exercise in a group. For more information,
see Using a New Accessory in the user manual.
Before entering an event, make sure to perform the teaching process at home. This is to prevent interference
due to the long-range data transmission.
If you purchased the sensor and cycling computer together, as a set, the sensor will already have been
"taught" to work together with the cycling computer. In which case you will only need to activate the
sensor in your cycling computer. For more information see Bike Settings in the user manual.
14 Prepare For Training