Table of Contents
Advertisement
Calibrate
altitude: Set the correct altitude. It is recommended to always manually calibrate altitude when you know
l
your current altitude.
Interval
timer: Create time and/or distance based interval timers to precisely time work and recovery phases in your
l
interval training sessions.
Current location
l
Choose
Set location guide
l
goes to
Back to Start
*This selection is only available if GPS is set on for the sport profile.
In pause mode, press and hold LIGHT to enter
Lock
buttons: Press START to lock buttons. To unlock, press and hold LIGHT.
l
Set front lighton
l
Training
sounds: Choose Off, Soft,
l
Heart rate
settings:
l
its: Check the limits for each heart rate zone.
other compatible devices (e.g. gym equipment) can detect your heart rate.
Bike power
settings:
l
FTP).
Power, rolling
value: Set your FTP (Functional Threshold Power) value. The setting range is 60 to 600 watts.
limits: Check your power zone limits.
Bike power settings are visible only if you have paired the sensor. For more information on calibration, see
LOOK Kéo Power Sensor Bluetooth®
GPS
recording: Choose
l
Calibrate power
l
on calibration, see
Bike
settings:
Used
l
Calibrate
altitude: Set the correct altitude. It is recommended to always manually calibrate altitude when you know
l
your current altitude.
Speed
settings:
l
chosen imperial units, choose
the limits for each speed zone.
Automatic pause
l
automatically paused when you stop moving.
Automatic
lap: Choose Off,
l
which each lap is taken. If you choose
To use automatic pause or distance-based automatic lap, you must have the GPS function on or Polar Speed Sensor
Bluetooth® Smart in use.
FIRMWARE UPDATE
The firmware of your M460 can be updated. Any time a new firmware version is available, FlowSync will notify you when
connecting M460 to your computer with the USB cable. The firmware updates are downloaded via the USB cable and
info*: Current location and the number of visible satellites.
on*, and press START.
view.
Quick
or off.
Loud
Heart rate
view: Choose
Power
view: Set how you want to view your power data
average: Choose 1, 3, 5, 10, 15, 30 or 60 second rolling average of power data.
Smart.
Off
or On.
sensor: Power sensor calibration is visible only if you have paired the sensor. For more information
Polar LOOK Kéo Power Sensor Bluetooth®
sensors: View all the sensors you have linked to the bike.
Speed
view: Choose
km/h
mph
(miles per hour) or
sett.:
Automatic
pause: Choose
Lap distance
Lap
Location guide arrow view set on
menu. You'll find:
or
Very
loud.
Beats per minute (bpm)
HR visible to other
device: Choose
Smart.
(kilometers per hour) or
min/mi
(minutes per mile).
On
or Off. If you set the automatic pause On, your session is
Activation
speed: set the speed at which recording is paused.
or
Lap
duration. If you choose
duration, set the duration after which each lap is taken.
27
is displayed, and M460
or
% of
maximum.
On
or Off. If you choose On,
(Watts
(W),
Watts/kg (W/kg)
min/km
(minutes per kilometer). If you have
Check speed zone
Lap
distance, set the distance after
Check HR zone lim-
or
% of
Set FTP
Check power zone
Polar
limits: Check
Advertisement
Table of Contents
