Sms Control; Perfecta Control Application - Satel PERFECTA Quick User Manual

8 PERFECTA SATEL

3. SMS control

You can control your alarm system by using SMS messages containing appropriate control
commands. The SMS message must be sent to the number of the currently used SIM card.
Agree with the installer:
 content of t
he control commands.
 functions that are to be run by these commands.
 phone numbers
from which it will be possible to send control commands.
You can insert several control commands in one SMS message.
When sending the USSD codes, the SMS message must have the following form:
xxxx=yyyy=
where "xxxx" is the control command and "yyyy" is the USSD code supported by the GSM
network operator.
You can use a command controlling the sending of USSD codes to send an SMS message
via the control panel. The form of SMS message you will send to the control panel must be
as b el ow:
xxxx=tttt:cccc=
where "xxxx" is the control command, "tttt" is the phone n umber to which the control panel is
to send the SMS message, and "cccc" is the content of SMS message to be sent by the
control panel.
The control panel is case sensitive.
4. PERFECTA C application
ONTROL
The PERFECTA C is an application which enables remote operation of the alarm
ONTROL
system from mobile devices. Additionally, the application can provide information about alarm
system events by using push notifications.
You can download the application from the internet stores: "Google play" (Android system
devices) or "App Store" (iOS system devices).
The tutorial will prompt you for what to do next, thus configuration of the application settings
easier.
You can use the 7.IMEI/ID function on the keypad to check such parameters as IMEI number
and ID number, which are to be entered when configuring the settings (enter the user menu
a nd press in turn ). You can also enter these parameters by reading the QR code
with a mobile device. Ask the installer for the QR code.
If the communication settings are configured in one mobile device, you can easily copy these
settings to another mobile device. To do so, just display the QR code on the device in which
the settings for communication with the given control panel are already configured, and read
it on another device.