Pl 5.45 Dadf Assembly (5 Of 7) (4250/4260) - Xerox WorkCentre 4150 Service Manual

PL 5.45 DADF Assembly (5 of 7)
(4250/4260)
Item Part Description
1 – Pickup guide assembly (P/O
5.30 Item 26) (REP
2 – Exit guide assembly (P/O
Item 26)
3 – Guide (P/O PL 5.30 Item
4 002N02819 Retard pad (See Note)
5 – Sponge pad (P/O
6 – Rubber pad (P/O
7 – Pickup guide upper housing (P/O
PL 5.30 Item 26)
8 – Duplex roll (P/O PL 5.30 Item
9 – Feed idler spring (P/O
26)
10 130N01274 Document detect sensor
(Q05-100), Paper width sensor
(Q05-110) (REP
11 – Transport idler (11A), Duplex roll
idler (11A) (P/O
12 – Idler shaft (P/O PL 5.30 Item
13 – Pickup guide lower housing (P/O
PL 5.30 Item 26)
14 – Actuator spring (P/O
26)
15 – Document detect sensor actuator
(15A), Paper width sensor actuator
(15B) (P/O PL 5.30 Item
16 – Exit guide lower housing (P/O
5.30 Item 26)
17 – Idler shaft (P/O PL 5.30 Item
18 – Feed idler spring (P/O
26)
19 – Exit guide upper housing (P/O
5.30 Item 26)
20 – Upper exit roll (P/O
26)
NOTE: HFSI. To reset the HFSI count, go to GP 16.
Parts List
PL 5.45
PL
5.12)
PL 5.30
26)
PL 5.45 Item 4)
PL 5.45 Item 4)
26)
PL 5.30 Item
5.12)
PL 5.30 Item 26)
26)
PL 5.30 Item
26)
PL
26)
PL 5.30 Item
PL
PL 5.30 Item
January 2016
WorkCentre 4150/4250/4260/4265WorkCentre 4150/4250/4260WorkCentre