Pl 10.28 Fuser (1 Of 2) (4250/4260/4265) - Xerox WorkCentre 4150 Service Manual

PL 10.28 Fuser (1 of 2)
(4250/4260/4265)
Item Part Description
1 126N00427 Fuser assembly (220V) (4265)
– 002N02805 Fuser assembly (110V)
(NASG/XCL) (4250/4260) (See
Note 1)
– 002N02806 Fuser assembly (220V) (XE)
(4250/4260) (See Note 1)
– 126N00426 Fuser assembly (110V) (4265)
2 130N01463 Thermostat assembly
3 031N00217 Stripper finger assembly
4 – Stripper finger (P/O
3)
5 – Finger holder (P/O
6 – Spring (P/O PL 10.28 Item
7 009N01642 Spring (REP
8 152N11766 Connector
9 130N01462 Thermistor assembly
10 120N00534 Fuser exit sensor assembly
11 – Actuator cradle (P/O
10)
12 – Exit sensor actuator (P/O
Item 10)
13 – Spring (P/O PL 10.28 Item
14 – Fusing unit (P/O
15 – AC Fuser harness (Not Spared)
16 140N63354 CRUM
17 – Terminal cover (P/O
1)
18 – Thermistor cover (P/O
Item 1)
19 130N01561 NC Thermistor
20 – Spring bracket (P/O
1)
21 – Fuser CRUM assembly (P/O
10.28 Item 1)
NOTE: 1. HFSI. To reset the HFSI count, go to
NOTE: 2. The fuser exit sensor is located on
2.
WorkCentre 4150/4250/4260WorkCentre 4150/4250/4260/4265WorkCentre
PL 10.28 Item
PL 10.28 Item 3)
3)
10.7)
PL 10.28 Item
PL 10.28
10)
PL 10.28 Item 1)
PL 10.28 Item
PL 10.28
PL 10.28 Item
PL
GP 16 .
PL 10.15 Item
January 2016
Parts List
PL 10.28