Pl 5.20 Dadf Assembly (3 Of 4) (4150) - Xerox WorkCentre 4150 Service Manual

PL 5.20 DADF Assembly (3 of 4)
(4150)
Item Part Description
1 – Transport assembly (REF:
Item 2)
2 – Exit roll (P/O PL 5.10 Item
3 – E-clip (Not Spared)
4 140N63152 DADF sensor PWB
5 007N01538 Exit roll gear (REP
6 140N63144 DADF PWB (REP
7 – Scan motor harness (P/O
Item 2)
8 152N11711 Main I/F
9 – Left guide (P/O PL 5.10 Item
10 – Right guide (P/O
11 130N01465 Lower feed assembly
12 019N00795 Retard pad (See Note)
13 140N63150 Document detect sensor
(Q05-100), Paper width sensor
(Q05-110) assembly
14 – Lower feed bottom cover (P/O
5.20 Item 11)
15 – Lower feed top cover (P/O
Item 11)
16 140N63151 Exit open Sensor (Q05-150)
17 120N00488 Actuator
18 – Spring (P/O PL 5.20 Item
20 – Idler roll (P/O PL 5.20 Item
21 – Idler disc (P/O PL 5.20 Item
22 – Shaft (P/O PL 5.20 Item
5.1)
23 – Spring (P/O PL 5.20 Item
24 063N00110 Static eliminator
25 – Exit cover (P/O PL 5.20 Item
26 002N02584 Exit assembly (REP
27 – Clutch & switch harness (P/O
5.10 Item 2)
28 – Exit roll bearing (P/O
2)
29 – Bearing (P/O PL 5.10 Item
30 – Scan motor harness (P/O
Item 2)
NOTE: HFSI. To reset the HFSI count, go to GP 16.
Parts List
PL 5.20
PL 5.10
2)
5.1)
5.2)
PL 5.10
2)
PL 5.10 Item 2)
(REP 5.1)
PL
PL 5.20
11)
26)
26)
26) (REP
26)
26)
5.1)
PL
PL 5.10 Item
2)
PL 5.10
January 2016
WorkCentre 4150/4250/4260/4265WorkCentre 4150/4250/4260WorkCentre