Port Filtering - LevelOne WGR-8031 User Manual

15

Port Filtering

Option
Enable Port
Filtering
Port Range Enter the port range to be filtered for both Outbound and Inbound packet
Protocol Select the Protocol to be filtered for both Outbound and Inbound packet
Both: To filter both TCP and UDP protocol
TCP: To filter only TCP protocol
UDP: filter only UDP protocol
Comment Fill in the note for manager what the purpose of certain port filtering rule
Current Filter The Port Filters that was created is listed here
Table
Entries in Current Filter Table are used to restrict certain ports
and types of data packets from your local network to Internet
through the Gateway. Use of such filters can be helpful in
securing or restricting your local network.
1. From the head menu, click on Firewall.
2. From the left-hand menu, click on Port Filtering. The
following page is displayed:
Description
Enable/Disable the WAN packet filter.
Default setting is Disable.
237