Ip Filtering For Both Tcp And Udp With Specified Ip - LevelOne WGR-8031 User Manual

3. Check the option Enable IP Filtering to enable the IP
Filtering.
4. Enter the IP Address that you want to be denied in Local IP
Address field.
5. From the Protocol drop-down list, select UDP setting.
6. Enter any comment in Comment field.
7. Click Save & Apply.
8. Now the IP Filter that you created has been added and
listed in the Current Filter Table.
9. Now the UDP protocol for both Outbound and Inbound
packet has been denied.
Now The Local IP Address for example 10.0.0.102 that listed in
the Current Filter Table cannot visit any application that use
UDP protocol for example TFTP Service due to the Protocol
UDP has been blocked by the IP Filtering rule that created.

IP filtering for both TCP and UDP with specified IP

Please follow example below to deny the both TCP and UDP
protocol for specified IP.
1. From the head menu, click on Firewall.
2. From the left-hand menu, click on IP Filtering. The following
page is displayed:
246